*Suitable for push back and wind -back brake pistons

*For different kinds of vehicles 

*Applications: Mercedes, BMW, VW, GM, Audi, Ford, Honda, Subaru, Mazda, Nissan, Mitsubishi, Toyota, Rover, 4WD

*Instructions for use:

 1. Jack up the car and support on axle stands. Then remove the relevant road wheel.

 2. Remove the caliper from its carrier and take out the brake pads.

3. Fit the main body of the wind back tool into the caliper, turn the main thrust bolt clockwise to compensate for the distance

    between the piston and caliper body.

4. Select the correct adaptor and fit it to the end of the main thrust bolt. Continue rotating the thrust bolt clockwise, until the

    pegs of the adaptor are centered and correctly located into the mating recesses in the piston.

5. Turn the thrust bolt to wind the caliper piston back into its housing.

6. Fit the new brake pads and bolt the caliper back onto the carrier.

*Packing (Blow case): 10set/ctn, 20kgs/21kgs/2’